smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.54-Unraid] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Plus Device Model: WDC WD20EFRX-68EUZN0 Serial Number: WD-WCC4M1UC4EAD LU WWN Device Id: 5 0014ee 2b709df4c Firmware Version: 82.00A82 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.5/5988 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 13 11:45:24 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 271) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 748 3 Spin_Up_Time POS--K 176 173 021 - 4175 4 Start_Stop_Count -O--CK 075 075 000 - 25905 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 070 070 000 - 22314 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 077 077 000 - 23183 192 Power-Off_Retract_Count -O--CK 200 200 000 - 120 193 Load_Cycle_Count -O--CK 192 192 000 - 25787 194 Temperature_Celsius -O---K 126 101 000 - 21 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 750 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 750 [5] occurred at disk power-on lifetime: 22278 hours (928 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 10 40 00 Error: UNC at LBA = 0x03c5a210 = 63283728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 03 c5 a2 10 40 00 01:03:11.047 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 01:03:11.046 READ LOG EXT 60 00 08 00 00 00 00 03 c5 a2 10 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a2 08 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a2 00 40 00 01:03:07.588 READ FPDMA QUEUED Error 749 [4] occurred at disk power-on lifetime: 22278 hours (928 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 10 40 00 Error: UNC at LBA = 0x03c5a210 = 63283728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 03 c5 a2 10 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a2 08 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a2 00 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a1 f8 40 00 01:03:07.588 READ FPDMA QUEUED 60 00 08 00 00 00 00 03 c5 a1 f0 40 00 01:03:07.588 READ FPDMA QUEUED Error 748 [3] occurred at disk power-on lifetime: 22278 hours (928 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 10 40 00 Error: UNC at LBA = 0x03c5a210 = 63283728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 18 50 00 48 00 00 03 c6 8b 50 40 00 01:03:03.005 READ FPDMA QUEUED 60 08 00 00 40 00 00 03 c6 83 50 40 00 01:03:03.002 READ FPDMA QUEUED 60 08 10 00 f0 00 00 03 c6 7b 40 40 00 01:03:02.998 READ FPDMA QUEUED 60 06 20 00 38 00 00 03 c6 75 20 40 00 01:03:02.995 READ FPDMA QUEUED 60 04 08 00 30 00 00 03 c6 71 18 40 00 01:03:02.991 READ FPDMA QUEUED Error 747 [2] occurred at disk power-on lifetime: 22044 hours (918 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 10 40 00 Error: UNC at LBA = 0x03c5a210 = 63283728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 03 c5 a2 10 40 00 06:57:01.303 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:57:01.292 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 06:57:01.291 READ LOG EXT 60 00 01 00 00 00 00 03 c5 a2 11 40 00 06:56:57.784 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:57.773 READ FPDMA QUEUED Error 746 [1] occurred at disk power-on lifetime: 22044 hours (918 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 11 40 00 Error: UNC at LBA = 0x03c5a211 = 63283729 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 03 c5 a2 11 40 00 06:56:57.784 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:57.773 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 06:56:57.773 READ LOG EXT 60 00 01 00 00 00 00 03 c5 a2 12 40 00 06:56:54.265 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:54.254 READ FPDMA QUEUED Error 745 [0] occurred at disk power-on lifetime: 22044 hours (918 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 12 40 00 Error: UNC at LBA = 0x03c5a212 = 63283730 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 03 c5 a2 12 40 00 06:56:54.265 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:54.254 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 06:56:54.254 READ LOG EXT 60 00 01 00 00 00 00 03 c5 a2 13 40 00 06:56:50.747 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:50.736 READ FPDMA QUEUED Error 744 [23] occurred at disk power-on lifetime: 22044 hours (918 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 13 40 00 Error: UNC at LBA = 0x03c5a213 = 63283731 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 03 c5 a2 13 40 00 06:56:50.747 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:50.736 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 06:56:50.735 READ LOG EXT 60 00 01 00 00 00 00 03 c5 a2 14 40 00 06:56:47.228 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:47.217 READ FPDMA QUEUED Error 743 [22] occurred at disk power-on lifetime: 22044 hours (918 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 c5 a2 14 40 00 Error: UNC at LBA = 0x03c5a214 = 63283732 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 03 c5 a2 14 40 00 06:56:47.228 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:47.217 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 06:56:47.217 READ LOG EXT 60 00 01 00 00 00 00 03 c5 a2 15 40 00 06:56:43.709 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 00 00 00 40 00 06:56:43.698 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 70% 22298 - # 2 Short offline Aborted by host 90% 22297 - # 3 Short offline Completed without error 00% 22288 - # 4 Short offline Completed without error 00% 21670 - # 5 Extended offline Interrupted (host reset) 70% 21642 - # 6 Extended offline Interrupted (host reset) 10% 21588 - # 7 Short offline Completed without error 00% 21505 - # 8 Short offline Completed without error 00% 21428 - # 9 Short offline Completed without error 00% 21340 - #10 Short offline Completed without error 00% 21225 - #11 Short offline Completed without error 00% 21173 - #12 Short offline Completed without error 00% 21116 - #13 Short offline Completed without error 00% 16646 - #14 Short offline Completed without error 00% 16031 - #15 Extended offline Interrupted (host reset) 10% 16026 - #16 Short offline Completed without error 00% 15794 - #17 Short offline Completed without error 00% 15772 - #18 Short offline Completed without error 00% 15467 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 21/21 Celsius Lifetime Min/Max Temperature: 2/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (76) Index Estimated Time Temperature Celsius 77 2025-12-13 03:48 24 ***** ... ..( 99 skipped). .. ***** 177 2025-12-13 05:28 24 ***** 178 2025-12-13 05:29 ? - 179 2025-12-13 05:30 24 ***** ... ..( 4 skipped). .. ***** 184 2025-12-13 05:35 24 ***** 185 2025-12-13 05:36 25 ****** 186 2025-12-13 05:37 25 ****** 187 2025-12-13 05:38 25 ****** 188 2025-12-13 05:39 26 ******* ... ..( 2 skipped). .. ******* 191 2025-12-13 05:42 26 ******* 192 2025-12-13 05:43 27 ******** 193 2025-12-13 05:44 27 ******** 194 2025-12-13 05:45 27 ******** 195 2025-12-13 05:46 ? - 196 2025-12-13 05:47 24 ***** 197 2025-12-13 05:48 ? - 198 2025-12-13 05:49 21 ** ... ..( 2 skipped). .. ** 201 2025-12-13 05:52 21 ** 202 2025-12-13 05:53 22 *** 203 2025-12-13 05:54 23 **** 204 2025-12-13 05:55 23 **** 205 2025-12-13 05:56 24 ***** ... ..( 4 skipped). .. ***** 210 2025-12-13 06:01 24 ***** 211 2025-12-13 06:02 25 ****** 212 2025-12-13 06:03 25 ****** 213 2025-12-13 06:04 25 ****** 214 2025-12-13 06:05 ? - 215 2025-12-13 06:06 25 ****** 216 2025-12-13 06:07 25 ****** 217 2025-12-13 06:08 26 ******* 218 2025-12-13 06:09 26 ******* 219 2025-12-13 06:10 ? - 220 2025-12-13 06:11 21 ** 221 2025-12-13 06:12 25 ****** ... ..( 67 skipped). .. ****** 289 2025-12-13 07:20 25 ****** 290 2025-12-13 07:21 ? - 291 2025-12-13 07:22 25 ****** ... ..( 3 skipped). .. ****** 295 2025-12-13 07:26 25 ****** 296 2025-12-13 07:27 26 ******* ... ..( 2 skipped). .. ******* 299 2025-12-13 07:30 26 ******* 300 2025-12-13 07:31 27 ******** ... ..( 8 skipped). .. ******** 309 2025-12-13 07:40 27 ******** 310 2025-12-13 07:41 26 ******* ... ..( 3 skipped). .. ******* 314 2025-12-13 07:45 26 ******* 315 2025-12-13 07:46 25 ****** ... ..( 14 skipped). .. ****** 330 2025-12-13 08:01 25 ****** 331 2025-12-13 08:02 24 ***** ... ..(222 skipped). .. ***** 76 2025-12-13 11:45 24 ***** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 19 Vendor specific